Seriously guys. When I saw this gold polka dot burlap at Joann’s, I just about fainted. How cute is this?!? It was begging to be made into bunting.
- hot glue gun
- tacky glue
- pinking shears
1) Cut your twine to the length of where you will be hanging your bunting, making sure to leave leeway at each end (if you want loose ends hanging). Make sure your twine isn’t stretched completely taut (unless you want completely horizontal bunting with no curvature, in which case, ignore me).
2) Cut your burlap into flags of the shape of your choice. I obviously chose rectangles– about 5.5″x 4.5″. Cut as many as you need to fill up the length of your twine, leaving a small amount of space between each flag. You can eyeball the spacing; mine was about 5/8″ between each flag.
3) Fold the top edge of each flag over the twine (~1/2 inch of burlap) and hot glue into place. Repeat for each flag. If you don’t want to use hot glue, weaving an embroidery needle + baker’s twine (in place of the thicker twine) through the top of each flag would work as well.
4) Using your pinking shears, cut out a heart from a piece of fabric of your choice. Tacky glue your heart to a piece of felt, then cut along the border of your fabric heart with regular scissors, leaving about 1/2″ border of felt. Glue your felt-fabric heart to the middle of a flag. Repeat for as many flags as you wish.
That’s it! Easy-peasy! I hung my bunting (just 4 flags across with a heart on the second flag) on the top of a small bookshelf.